Bolenz Range

Accumulators

  • BSD Accumulator Calculations

    The following calculation formula will give you only a simple, approximate calculation for the needed accumulator- and accumulator unitsize. For a detailed calculation and a simulation close to reality we advise you our calculation program BSD ACCU

  • BSD Acceptance

    As part of the KAK and AK production series,BOLENZ & SCHÄFER's pressure vessels are made for the European market. They are inspected and approved according to the directive "Druckgeräterichtlinie DGRL 97/23/EG".

  • Operation and Maintenance BSD Piston Accumulator

    Openings are closed before transport, bright connection flats are greased and protected against mechanical damage as far as necessary.

  • KAK AK Piston Accumulator

    BSD piston accumulators are suitable for storing hydraulic energy, absorbing pressure shocks, pulstion damping and compensating for flow fluctuation through compression of nitrogen

  • UAK KAK Piston Accumulator

    BSD piston accumulators are suitable for storing hydraulic energy, absorbing pressure shocks, pulstion damping and compensating for flow fluctuation through compression of nitrogen.

  • Piston Positioning Monitoring

    The electrical limit switch device consists of a non-magnetic casing, a switch rod with a set of permanent magnets, 1 break contact limit switch (NCC) and/or 1 close contact limit switch (NOC). The limit switch unit, and its seal is installed on the end of the accumulator.

  • BSD Accumulator Units

    of BSD piston accumulators become most effective when operated in conjunction with auxiliary gas bottles. The size and number of the required accumulators are determined by the individual requirement.

OUR
BRANDS